Fiber Laser Engraver
CO2 Laser Engraver
UV Laser Engraver
Diode Laser Engraver
3D Laser Engraver
Handheld Laser Welder
Pulsed Laser Welder
CW Laser Welder
Jewelry Laser Welder
Pulse Laser Cleaner
CW Laser Cleaner
Fiber Laser Cutter
CO2 Laser Cutter
Optic Lens
Laser Cutting Nozzles
Laser Cutting Head
Laser Ceramics
Cleaning Tools
Fiber Laser Controller
Fiber Laser Source
Laser Welding Nozzles
Laser Welding Guns
Welding Safety
Wire Feeders
Scale Tube
CO2 Laser Lens
CO2 Laser Tube
CO2 Laser Controller
Water Chiller
Power Supply
CO2 Laser Rotary
CO2 Laser Alignment
Metal Parts Set
F-theta-Lens
Laser Rotary
Laser Source
Work Table
JCZ Controller
Galvo Head
Laser Engraving Materials
Lifting Column
Laser Path
Laser Safety Glasses
Machine Cabinet
How to Maintain the Laser Tube？
How to maintain the laser tube parts of the laser marking machine
1. When using a laser marking machine, try to reduce the number of times the laser is turned on, because the number of times it can be turned on is limited. Just like a light bulb, it is easier to break if it is switched on and off frequently.
2. the power control, while using the laser marking machine, it is necessary to select the appropriate power according to the workpiece to be processed. Doing laser processing does not mean that the higher the power, the better. We should proceed from the actual situation, and select the appropriate and lower power under the condition of ensuring the same processing quality, which not only saves electricity but also benefits the laser tube.
3. When finishing a day's processing, the whole machine must be shut down in time to avoid the "dry operation" of the whole machine, because long-term "dry operation" is a kind of loss to every part of the whole machine. Especially the core parts.
4. Keep the workshop clean and tidy, especially to prevent the pollution of dust, debris and particulate matter. Because lasers and galvanometers are very "squeamish".